Hello all. Although this is not my first project, it is the first one I feel good enough about to post. I got the basic design from one I saw on the FWW web site IIRC. The wood is curly maple with some spalting. The beading and pulls are walnut. I made the beading using a Stanley 45 I picked up at a yard sale. I even turned the pulls. (It only took me 15 tries to get 4 that looked almost the same.) I'm not sure if I should make the pulls for the top drawers smaller. Please let me know. The finish is Bush oil. I will be putting a few coats of rubbed varnish on as it will be in the kitchen. Thanks for looking and please be generous with the faults.