I need to conceal table saw and 3 roll aways on front wall of my garage and eliminate pegboard storage to keep LOML happy. I have 14 feet width 4 feet depth and 8 foot + height to play with.
My first thought is to hang a 2 x 6 ledger on garage wall running the full 14 foot width and then build a 40 inch deep shelf consisting of 2 layers of 3/4 MDF with adequate supports and laminate topping for appearances. Will not be using this as a work surface.
My table saw will require a bay nearly 7 feet wide by 36 deep with fence removed. I'd like to hide it with sliding doors but I haven't located sliding HW of sufficient length. Perhaps I'll hang doors from eye hooks and remove doors as needed to access saw.......any suggestions.
Above the 40" shelf I am thinking of some deep cabinets with attractive doors and face frames. Any suggestions on reasobaly priced doors that I should consider building? Perhaps half of the space behind doors will be large plastic bins for jigs, tools, whatever. The remaining 50% will be deep drawers on slides, deep shelves, vertical storage slots whatever.
Any thoughts or suggestions appreciated