Good Day to the Creek!
My next project is a going to take me a little time.
I have built the bases for a section of my shop that
will have a ton of drawers. Around 28 in the bases
and the uppers will have 6.
Being that this part of my shop will be my Neander Haven
all the drawers will be hand cut 1/2 blinds.
With the bases ready for the drawers I have got the parts ready for 15 of the drawers.
IMG_5011.jpg IMG_5003.jpg
And now a little practice on some scraps.
I don't cut dovetails every day so for me it's best to work out the bugs before I screw up a drawer.
My first one was a little tight and it cracked.....
IMG_5006.jpg
The second was not bad but in making the pins as small as I could there was one little gap...
IMG_5009.jpg
Now that the practicing is out of the way there will be a lot of nights in the shop to get all of them done....
.