I need to do some severe bending on some stock and need to steam it. I'm having some problems finding a steam box in any of my catalogs. Any of you have any info on sources for these? I'd apreciate any info on these. Thanks in advance.
Lou
I need to do some severe bending on some stock and need to steam it. I'm having some problems finding a steam box in any of my catalogs. Any of you have any info on sources for these? I'd apreciate any info on these. Thanks in advance.
Lou
Procrastination.......
Maybe I'll think about that tomorrow
Dewey
"Everything is better with Inlay or Marquetry!"
I don't know if you can buy a steam box - seems like everybody makes their own. Any book on steam bending usually gives directions on how to do it.
Mike
Go into the world and do well. But more importantly, go into the world and do good.
You don't even need to be a "woodworker" to make one. Just smack together a box that your wood will fit in. Make it out of anything. Seal up the ends with some pieces of wood and rags. Or bricks. It doesn't matter. Here's a recent thread on the same subject...
http://www.sawmillcreek.org/showthread.php?t=98898
David DeCristoforo
Thanks guys. Looks like building my own is the best option. Thanks again and Happy New Year.
Lou
Procrastination.......
Maybe I'll think about that tomorrow
I used 6" pvc last time.