I am in the market for a quality respirator to protect myself from sanding dust, mostly when sanding on the lathe. The LOML recently read some article regarding the latest medical findings on the health effects of fine sawdust, and it is enough to scare ya. I have looked closely at the Trend Airshield and the Triton System. Any thoughts or comments on either unit? I believe several members here have and use the above products, and I was curious how they perform and what you like/dislike about them. I realize my new Cyclone will get a LOT of the sanding dust, and I want to protect myself as well. I would hate to have my Woodworking cut short due to circumstances I can control, and chose to ignore. Thanks in advance for taking the time to reply!