I'm about to move to a new shop (gloat). Moving from 350 to 750 sq.ft. of space. Here is what I'm thinking and would welcome your advice or thoughts on tool placement and such. Items numbered are:

1) 12' of wood storage
2) 2 1/2 ft of vertical Ply storage
3) 12" SCMS on Ridged mobile stand
4) Jointer Griz 490
5) Griz 1023 table saw w/ 5' x 8' table around saw
6) Griz 453 planer
7) 5' X 8' Work Assembly / Out feed table
8) chip Separator & Griz 1029 DC in Closet
9) Air Compressor ( thinking about putting it in upper space of DC closet
10) Upper and lower cabinets for storage
11) (not place yet) 22" X 44" Preformax drum sander
12) (not place yet) Drill press
13) (not place yet) Griz 513 Band-saw
The dotted line at the bottom is the boundary line and the jagged line at the lower left is a 10' overhead door.

Any advice/thoughts are welcome.