The system arrived last week safe and sound all the way from Texas to Canada. A pretty intimidating system for a first time user and I realize I have to spend way more time in the user manual. Cutting regular dovetails are not a problem as long as there is a supplied template. But right of the bat I have to route dovetails as shown in the top left diagram and as there are no templates for this type of spaced dovetail I'm at a loss where to begin.

Some other questions:

If the stock is ¾ inch thick, must I used a ¾ inch bit?

What are the incremental templates for as I found no reference to them in the manual, but possibly they could be used to figure out oddly spaced joints and my problem.

Thanks
<O
Brian