Hi Creekers, I'm building an audio cabinet and using Blum concealed hinges for the doors. They are the Blum 110 degree Blumotion overlay (for the left and right doors, the center door will be inset). I've done this many times before using the Rockler jig at the 5mm setting, and each time came out great. But all of those projects used doors that are 3/4" thick. The doors for this cabinet are 1" thick (actually 15/16"). The frameless cabinet sides are 3/4" thick. In reviewing the install instructions on the Blum website, I see that the location to drill the 35mm hole on the door changes a bit with a thicker door, but beyond that it is as clear as mud. Can anyone tell me how to locate the proper drill center for a 1" thick door? (Not sure why the door thickness matters).

Thanks as always for any assistance!

Len