First I am new to turning bowls and currently use easy tools carbide cutters and really like them. I started turning bowls and can easily make a tenon with the dovetail to hold the bowl in the chuck using the diamond carbide tool. My question is what is the best way to get the dovetail profile on a RECESSED mortise on a bowl? The only I can figure to get the dovetail profile on a recessed mortise with the diamond carbide cutter seems to be very difficult (holding the handle of the tool far to the right away from the body to get the correct dovetail. I am sure there is an easier way but this has me stumped. Any suggestions? Thank you for your assistance.