I wanted to see if you all could point me to, or see if anyone is interested, in a very small project.
I have a couple vintage outdoor chairs from 1961. One of the round wood "legs" is broken and I need a replacement. The photos are pretty self-explainatory. The full diameter is right at 1 inch. The relieved area that goes into the aluminium tube is about 7/8". The entire leg is 7 inches, the smaller part is 4 inches. I would not need any holes bored or the chamfer on the bottom. I can provide 1 inch diamter wood rod as well. I am not sure of the wood, I have reached out to the company- still in business in New York, but have not heard back. I can match the stain with any straight grained lighter wood.
Have not found anyone local interested in such a small thing.
Reply With Quote