Just get a plug for a 240v and take the 30 seconds to switch the plug out. I have had 4 bandsaws. A 14" is a great start, as you can run a narrow blade for tight curves. I think resawing is a bit overrated. I rarely do it in over 20 years of woodworking. My former Agazzani & my current 21"/5hp Grizzly both have brakes & that is a very important feature, as otherwise it takes a while for a blade to spin down. Definitely cast iron & preferably a bigger motor. I have had 2 Jet 14" bandsaws, one of which is currently in my shop.

If I had to pick one, I'd get an 18" Laguna or a 17" Grizzly. I've been to Grizzly a few times, as it's close (my wife is from B'ham), but you can swing by Woodcraft downtown to have a look at the Laguna.