Long time lurker, but I don’t have much time to check in here anymore, much less actually play with my tools. But I got the itch and decided to build my daughter a jewelry box. Everything was going smoothly until today when I went to cut some spline grooves in the frame. The box fell and hit the floor while I was getting the cut set up. I thought it was just the back corner that got dinged up, but after I cut the grooves for the splines, I found the top edge was split all the way through. I’d really rather not have to make this entire frame again and was wondering if there was a good epoxy that will hide it or whether even wood glue would work. At least it’s a clean break, if I can find something thin enough to bond it back together, I doubt anyone will ever even be able to tell. I’ll attempt to post some pics.