#1--seal first!!! I use thin CNA--in your case I would hit it at lease twice since it's so deep. This should help with bubbles.
#2-- multiple pours of epoxy--maybe 1/4" at a time.
Bruce
#1--seal first!!! I use thin CNA--in your case I would hit it at lease twice since it's so deep. This should help with bubbles.
#2-- multiple pours of epoxy--maybe 1/4" at a time.
Bruce
Epilog TT 35W, 2 LMI SE225CV's
CorelDraw 4 through 11
CarveWright
paper and pencils