I figured I's post a few things that I finished up recently. Apologies if the pictures don't work correctly!

First up, after finishing my roubo bench, the plastic shelves and tubs that held my saws and planes just made me sad. So I built a tool cabinet with mostly leftovers, though I did need to buy some plywood for the shelves and part of the case. Plenty of mistakes, which means plenty of learning! You wouldn't believe how long it took me to do the mitered bridle joints for the door frames. I think next time I'll stick to mortise and haunched tenons.
IMG_2284.jpg
There are panels that swing out to give more space to mount stuff:
IMG_2286.jpg
After how long that took, I looked on fine woodworking's site for a quicker hand tool project. I saw this bench, and thought it'd be fun. Wedged through mortises, dadoes, and these mortised corner braces:
IMG_2344.jpg

IMG_2347.jpg
Now I'm almost ready to work on my kitchen bar stool chairs, which for some reason I've been dreading. Tapering legs seems to be harder than anything else for me, now that I'm trying to avoid power outside of milling!