Originally Posted by
Robert Engel
Use a 24T rip blade and do it in a couple or three passes. A thin kerf on a lower powered machine.
I'm totally with Lee, I also timed myself changing blades 1:43.
Not to hijack the thread, but I have a question to you guys re: SawStop. I have several blades that even adjust all the way down, its not within the spec distance for the brake. Most are blades I've had sharpened several times.
I'm using them anyway, my thinking is if tripped, it will only delay the stop time by a few milliseconds -- but, is this bad thinking? I've already had to bench a few blades and one dado set that have shoulders....