I have in Incra fence on my right tilt Unisaw. Can't really move it to the left. I have a couple projects that would be a lot simpler and more efficient if I could just rip some 8/4 hardwood boards at a 45% angle, then glue them up. I'm about to try making a few 3D end grain cutting boards, if anyone is wondering.... They need to be dimensionally equal. They will be at least 24" long. Longer if possible.

I really do not like ripping boards on this saw, and I usually find some other way to get around it. But I was playing around with the idea of building some type of jig, or sled to make this a safer, and more precise operation. I'm still waiting for an epiphany....

If anyone has some sage advice, I'd love to hear it.