Results 1 to 15 of 17

Thread: Starting an aggressive saw

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 10-15-2020, 2:06 PM #1
    Jason Buresh's Avatar
    Jason Buresh
    Jason Buresh is offline [OP] Contributor
    Join Date
    Jul 2019
    Location
    Northeast WI
    Posts
    571

    Starting an aggressive saw

    I recently picked up this old Disston. IMG_20200823_114506996.jpgIMG_20200823_114452139.jpgIt is stamped on the plate 5. It has a very aggressive tooth pattern but once it gets going it can rip.The problem is starting a kerf. I have been using a less aggressive saw to start a kerf and then come in with this one. Is there a trick to starting a saw like this?
    Last edited by Jason Buresh; 10-15-2020 at 2:56 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules