Three new walnut Charcuterie boards I made for gifts. The one with the butterfly is for my wife, and the other two are for friends. The piece I used for my wife's had a nasty knot that was separating form the rest of the board. I didn't want to just chuck it, so I tried my first attempt at epoxy and threw in my first butterfly (quartersawn sycamore) for good measure. All the boards are sanded to 600 grit and finished with Odie's Oil. I like these types of projects because I get to experiment and try new things. I use mostly hand tools, but this was good practice cutting curves on the bandsaw and using my power router with mixed results.

IMG_4760.jpgIMG_4763.jpgIMG_4646.jpgIMG_4650.jpgIMG_4651.jpgIMG_4654.jpgIMG_4655.jpgIMG_4658.jpg

I have step by step and more details if anyone is interested on my SimpleCove post

https://www.simplecove.com/1333/waln...uterie-boards/