I had some water damage to a bathroom floor and had to rip everything out around the toilet. I removed the toilet and was too lazy to look for something to plug the pipe right away. I think you know where this is going. Predictably, I got debris in the pipe. I decided to remove it with my shop vac. When I tried to extract the shop vac it was stuck in the elbow. Well, I decided the best thing to do was to just pull harder, which resulted in ripping the hose and leaving several inches of it stuck in the elbow. I have tried long reach pliers amd bent coat hangers with no luck. I would very much like to avoid cutting the pipe because I have no good way to get in there with a saw. Thoughts?