Hey guys, I have question for you all.

I finally picked up a cabinet saw (Grizzly G0833p) from OfferUp and it's been running great for a couple months now.

But, for the past couple weeks I've noticed some issues while cutting (blade bogging down while cutting 3/4" particle board for example) and today it just stopped mid cut and won't power back on.

When I opened up the cabinet the motor was extremely hot to the touch.

I've double checked the wiring from plug to switch to motor. I've opened the 2 capacitor houses and neither seems to be damaged or leaking.

Is it possible the motor has burned out?
The only other thing I can think of is the little 20amp breaker installed in the saws power switch but I'm not sure how to tell if it's bad or not.

Any help or advice would be greatly appreciated.