I would go neanderthal here. I'd use a marking gauge and run a mark on the side and on the top where you want the chamfer to end. Then use a bench plane and plane it down by hand. I've done that before and it's not all that hard.
Mike
Contributor
I would go neanderthal here. I'd use a marking gauge and run a mark on the side and on the top where you want the chamfer to end. Then use a bench plane and plane it down by hand. I've done that before and it's not all that hard.
Mike
Go into the world and do well. But more importantly, go into the world and do good.
Posting Permissions
Reply With Quote