I would appreciate some advice here, and it’s likely I’m not the first to do this but can’t find anything similar w searches.

I want to put in some t track with a rule to attach stop blocks to the left of the blade, but don’t want any fence or anything sticking up above table surface. I’ve found I rarely need any more than the regular saw fence. But I do want something for cutoffs, something I could put on or take off when not used.

I was thinking about something like this Incra track with some knobs and blocks made by me. I don’t see how any of the commercially available flip stops would work since they all require a raised fence surface above countertop.

https://www.amazon.com/Incra-TTRACKP...gateway&sr=8-8

thx for any better brainstorming.

jon