Thoughts on the following?:
SAW-TILL-sawcreek2.jpg
SAW-TILL-sawcreek1.jpg

I am working on a saw till cabinet to fit within my existing tool cabinet, which is why it looks as it does.

I am wondering what others think about gluing 4" of back panel to the carcus at the top and bottom and then screwing the balance of the back panel...

I just want the back panel well secured and want to try to prevent any splitting in the future of the back panel. If I glued and screwed the full perimeter, I know i will see intermediate cracking...

Thanks

Jim Clendon