Results 1 to 15 of 81

Thread: adjustable groovers for shapers-which ones ?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-12-2019, 8:12 AM #33
    Greg Parrish's Avatar
    Greg Parrish
    Greg Parrish is offline Contributor
    Join Date
    Mar 2016
    Location
    Florida
    Posts
    1,951
    The spindle cap on my Felder has pins at the top. Could be what the pin holes on that slot cutter are for.
    FCE78BBC-F477-4D8D-80C8-CBA2B9CB2F49.jpg
    0CD2C359-76C5-41D6-9DFA-7C46769DE06B.jpg

    Also, as follow to an earlier discussion, my spindle measure roughly 1.18” which converts to 30mm.
    92773E6F-8C08-448C-88AC-E5C65DF3730D.jpg


    Quote Originally Posted by John Kee View Post
    Joe interesting find on the Stark groovers. If the pinholes have a center to center on approx. 46mm diameter they would fit the saw. They are still shown as viable PN's from the pics in the moulding section of the Felder catalog but it appears the pinholes are not right and could be put there for other applications. If you have a minute a measurement of the center to center distance would be great and remove any doubt. Mike D and I have been considering making a shaper hood for tenoning with larger cutters, I like your simple but effective approach.
    Last edited by Greg Parrish; 02-12-2019 at 8:15 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules