That is what one grandson wants Grandpa to build....and, he wants a drawer in it, too

Picked up a few Ash planks today....one of the 1 x 6s was 10' long....barely fit in the van..
IMG_6992.jpgside view.jpg
Also a couple 1 x 6 x 6' and a 2 x 4 x 8' Somehow managed to get the ten-footer to the shop....made two cross cuts...was going with 40" long...didn't quite work out
IMG_6995 (640x480).jpg
By the time these 3 were squared up to each other....top was just over 36" long...and will be around 16" wide...got out the jointers
IMG_7003 (640x480).jpg
Used both the #7c and the #8...
IMG_7004 (640x480).jpg
Wanted to get the edges glue-up ready...took awhile...was finally able to spread some glue, add the clamps and cauls..
IMG_7007 (640x480).jpg
Need to decide which face looks the better....this one, or..
IMG_7006 (640x480).jpg
Will find out in the morning...maybe I can start the legs....aprons will be after that....no bottom shelf to worry about.....going to try to make the drawer front from the from apron...might be "fun" to do? Have a deadline, this time around....
IMG_7008 (640x480).jpg
Put the planes away, sweep the floor....done enough for one day. Leftovers from the 2 x 4 x 8' will be used for the vise rehab....Ash might make decent jaws?

Stay tuned..