Hello All,

I think this may be my first post =) . I am working on trying to figure out the best way to layout my home garage shop and thought I would ask the community for advice on placement of tools.

First quick overview of the space : I have a tandem car garage that is split in half between space for the cars and open area. I have essentially started to build out my woodworking space in one of the corners and try and keep it all there. I have space for wood storage, tools, supplies outside of this space so mainly concerned with placement of my tools.

- I would prefer NOT to move my table saw if that's at all possible but its do-able
- I don't have any central dust collection yet but it's something to think about in here as well.
- The split between the spaces is open so it's an "invisible wall so to speak.

So here is my space and my initial ideas for the layout
Screen Shot 2018-08-20 at 12.29.16 PM.jpg

My main floor tools/considerations
: Table Saw (updating to a hybrid) - The saw right side would be close to the wall and run towards the bench
: Miter Saw
: Standing Drill Press
: Bench
: Assembly space would be nice

Anywho let me know what you guys think and if I should change my setup at all. Nothing here is set in stone - still just planning

Thanks!!!