Hi,
After setting up a vent to outside using only one inline blower for 2 machines I now understand that I should have chosen a proper dust extractor as although the current blower is a good 10" one Vent-Axia ACM 250 the air flow ok but the pressure is absolutely not enough.
I know there been a lot of discussions about this here but what is the main difference between
Penn State and Harbour Freight? Pen State is almost twice as expensive.
I can't find anything decent in the UK so would need to import one from the US. Don't want to make a wrong decision.
Should I go for 1.5hp or 2hp model?
Currently having Fusion M2 32 and Zing 16.
Distance from the extractor (will be wall mounted) to the fusion will be about 2 meters and to Zing further 2 meters.
Not very concerned about the noice as I will put it inside the soundproof box.
Just want to have a very good suction to have sheet materials flat on the table and to avoid odour from acrylic and wood going into a workshop
Thank you!