Results 1 to 15 of 21

Thread: Making Cove Molding on the Table Saw

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 01-02-2018, 2:49 PM #1
    George Bokros
    George Bokros is offline [OP] Contributor
    Join Date
    Jan 2009
    Location
    N.E, Ohio
    Posts
    3,029

    Making Cove Molding on the Table Saw

    An upcoming project will require cove molding. I am thinking about making my own on the table saw. Is this any more dangerous than ripping on the table saw? I checked our a Wood Magazine article and video and it looks easy enough.

    I know you are better off using a 60 - 80 tooth crosscut blade to reduce the amount of sanding required, is there anything one needs to know before making cove molding?

    I want to make my own so I can use the same material that the project (Shaker Style Mirror) will be made.

    Thanks.
    Last edited by Lee Schierer; 01-02-2018 at 10:23 PM. Reason: fixed the title
    George

    Making sawdust regularly, occasionally a project is completed.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules