Results 1 to 15 of 25

Thread: Looking for a new Shop Vac

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #16
    I have the 14-gallon Ridgid 1450 and the 12-gallon Craftsman XSP linked previously. Both have been good vacuums and both are reasonably quiet. I think you'd be happy with either one. Here's a good comparison review.

    http://www.garagejournal.com/forum/s...d.php?t=226762

    As you mentioned above, you can build a Thien top-hat separator to fit on your old vacuum canister, or you can buy a Dust Deputy and make a plywood lid to fit the canister. From what I've read, the Dust Deputy does a better job of separating out the fine particles.
    Last edited by Bob Faris; 05-31-2017 at 12:52 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •