I just picked up a Jet AFS-1000B air filtration system for my new garage shop (Will be posting shop build thread soon) and wanted to get some advice on where I should mount it for optimal circulation, etc.

Attached is a drawing of my shop. There is a 13-1/2" tall beam running across the shop which will slow down circulation, along with the water heater and furnace at the south end of the shop. The shop ceiling is approximately 8' tall.

The Miter station on the west side is planned but not in place and my table saw will be placed in the center of the shop and the remaining tools (Planer, Jointer, Drill Press, Bandsaw) will more than likely be placed on the east wall on mobile bases so they can be moved into location for use. Also, on the east wall in between the beam and water heater, is my initial location of where I'm thinking I will place my lumber rack.

With all of that in mind, does anybody have thoughts of where I should mount the air cleaner?

Shop_Layout.jpg