Good morning, I am currently planning on my router table build today and wanted to get input on material selection. I was considering using 3/4" double sided melamine for the base cabinet. The design is based on the NYWS design with a couple of modifications ( I am eliminating the toe kick and using the space as storage. I am also going to beef up the top mounts to help prevent sagging. I have some large pieces of melamine that I was considering using. I like the fact that once assembled it is already finished. I have built numerous shop cabinets (bases and uppers) out of it and it is easy to work and is a true 3/4" thick. I would then face frame with hardwood to help add strength to the assembly. I have seen videos where people use it just like plywood with dadoes, rabbets, etc...any input would be greatly appreciated.