only use hot glue if you are going to use at least 2 screws 1/4 inch into blank, i use this method with multi-axis turnings on large piece of mdf where i hot glue just around the edges of blank and to the mdf, but always use 2 screws with hot glue
Member
only use hot glue if you are going to use at least 2 screws 1/4 inch into blank, i use this method with multi-axis turnings on large piece of mdf where i hot glue just around the edges of blank and to the mdf, but always use 2 screws with hot glue
Last edited by charlie knighton; 01-06-2014 at 7:03 PM.
Posting Permissions
Reply With Quote