I'm remodeling our master bath. The tub will be an "undermount" with a marble lip mounted to the deck of the tub. I need a panel to cover the face of the tub. My problem lies with the existing base. It is 7" high and there is only 21 3/4" from the floor to the top of the 60" long tub. A small piece is visible on the right side of the image to give you an idea of proportions. I was considering a panel with a 9" bottom rail and 2" stiles and top rail. There would also be a 2" center stile. I would apply a piece of the base to the bottom of the front panel. I'm not sure about how all this would look aesthetically. Any input would be welcome.

pael.jpgtub1.jpg