Results 1 to 15 of 29

Thread: "Jitter" on Curves

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 01-03-2013, 10:30 PM #1
    David Rust's Avatar
    David Rust
    David Rust is offline [OP] Member
    Join Date
    Sep 2012
    Location
    NH
    Posts
    204

    "Jitter" on Curves

    Hi All,

    I have been experiencing a new problem with my machine. While vector cutting curves the cuts are not smooth, they appear to have a "jitter" or "ripple". I called Epilog and they have been great as always, they identified some exrtra slop in my x-axis linear guide and sent me a replacement. After installation the problem is still there. Epilog is still looking at the problem.

    Has anyone experienced this problem and if so what was the solution?
    Jitter1.bmp


    Thanks,
    Dave Rust
    Last edited by David Rust; 01-03-2013 at 10:33 PM.
    Epilog Helix 60w
    Epilog Mini 18 30W
    Purex Xbase 200
    CorelDRAW X7
    Wood Carver
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules