I have searched thru and read most all posts on SMC concerning engraving photos on tile.
I have attached two samples for everyones review and comment. The tiles on the left of each picture are HD $0.54 cent white tile painted glossy black and engraved. The tiles on the right are "LaserTile" and engraved. With shipping the "LaserTile runs about $4.50 each.
The HD tiles are lasered at 100s, 35p, 600dpi.
The "LaserTile" is lasered at 100s, 35p, 600dpi.
As I look at these the "LaserTile does not have any high contrast and you don't get any black or very dark engraved areas, it is if you are looking at the tile thru a fog.
Is this the typical finished product that everyone gets with these tiles?
Reply With Quote