I have a VLS 2.30, 25 Watt.

I had just finished a run of 3 wine glasses. I changed out the rotary for the cutting tray, and attached the air assist cone when the system went haywire on me. The control panel screen on my computer started blinking and the machine powered off.

After some looking, I changed the 9v battery and reset the fuses. Now I can manually power on the machine, but there's no power button on the control panel screen. Whenever I click the "Home XY" button on the control panel, it's as if the x and y axis are inverted; the carriage is moving the opposite direction it should.

My machine is barely 9 months old, and has not endured hard use during that time. I have put a call in to my local sales rep, but haven't heard from him yet. Hopefully he's not on vacation.

Any ideas will be MUCH appreciated.