3d, vcarve, machining, signs,
3d, vcarve, machining, signs,
Jim is that solid maple?
I have a cousin in Santa Barbara CA. that's a amateur sailor,
he eats and breaths all things sailing, he would be impressed as much as I am.
I really cannot wait until I can produce quality like that.
Did you create that file yourself?
What type of finish did you use?
What art the dimensions?
More details please
Last edited by Keith Outten; 08-29-2008 at 7:55 PM.
[SIGPIC][/SIGPIC]Camaster Cobra 408 working table size 48 x 98
Wincnc,AspireII,PhotoVcarve,Cut3D
HX6090SE 60Wworking table 23”X36”
LaserCut 5.3
Coreldraw X3, photograV 3.0, Photozoom3
Sawmill Creek is financed in part through member contributions.
Many members just like you have found extraordinary value in becoming a financial supporter of SMC.
file is from one of the services i cant remember which ohe there are several vector art 3d has it!
\
ran 300ipm in yellow wood about two hours 10% stepover and very light sanding!
jim
[SIGPIC][/SIGPIC]Camaster Cobra 408 working table size 48 x 98
Wincnc,AspireII,PhotoVcarve,Cut3D
HX6090SE 60Wworking table 23”X36”
LaserCut 5.3
Coreldraw X3, photograV 3.0, Photozoom3
Sawmill Creek is financed in part through member contributions.
Many members just like you have found extraordinary value in becoming a financial supporter of SMC.
what i was hoping was to provoke some ionto showing what you do with your cnc!!
flutes
vector art 3d rosette, vcarve and a machine for printing money!!
From VectorArt. 18" x 18" x 1.25" Cut along Y using Gary Beckwith's bits
i wish i had more time!!
jim
Neville
Nice work - is that your vacuum setup (slide valve) sticking out from beneath your table. If so, can we get some more details and photos pls. It looks like a real compact arrangement.
Pete
Yes thats the vac system affectionately known as 9-15. I'm heading up to Norman Oklahoma to a workshop at Joe Crumley's in the morning. I'll post pics of the vac, table and all I learn from the most talented Mr. Crumley. Short & sweet, but I wanted to at least, respond. Neville
That's some very nice work.
Well just got back from Joes workshop, We learned lots of neat processes & tricks, including Sculpt Nouveau, designed, cut & finished the sign above us - Great time !! A big thanks to Joe, Gary, Chris, Doug, Leon, Pat, Dave, Bruce, Ken & Leon.
i have been keeping up with the sculpt noveau on shop bot!, that looks great!
jim
here is a new dust foot as the old one did not allow enough cfm's to be truley effective.
jim
Very Nice James - well made & I presume very effective.