Thinking about adding extra jaws to my Nova G3 chuck which came with the 50mm jaws.
I am looking at the 25mm standard jaws
http://www.teknatool.com/products/Ch...ories/25mm.htm
and the 25mm pin jaws.
http://www.teknatool.com/products/Ch...sories/Pin.htm
Which would be more beneficial or should I just get both? What about their other jaws, would there be any others that are good to have on hand?
I also have the Axminster collet chuck with the 3 basic collets they have available. I have the Jet 1220 VS lathe and turn mainly smaller stuff in addition to pens. Not into 12"+ bowls and have doubts I ever will be.
Thanks for any good advice you can offer.