I am trying to bond rowmark onto a piece of acrylic and will be outside. Anyone have any ideas on whatwould be the best tape or adhesive to use?
Thanks
I am trying to bond rowmark onto a piece of acrylic and will be outside. Anyone have any ideas on whatwould be the best tape or adhesive to use?
Thanks
Xenetech 13x25, Xenetech 9x12 Rotary, Corel 11, Photograv 2.11
Rowmark is acrylic too, just a different formulation. Weld-on works for that
as does E-6000. I have also used 3M 467MP film and it works fine outdoors here, but in sunnier hot summer climates may not last.
Sammamish, WA
Epilog Legend 24TT 45W, had a sign business for 17 years, now just doing laser work on the side.
"One only needs two tools in life: WD-40 to make things go, and duct tape to make them stop." G. Weilacher
"The handyman's secret weapon - Duct Tape" R. Green
I use 3M 465 2mil dbl sided tape, I purchase logs of it from Hisco in Houston, you can find them online, they custom cut it from 1/8" to 48" logs, will definately hold up outdoors.
Epilog Fusion Fiber 30 watt
Epilog 36 EXT 75 watt
Epilog 36 EXT 60watt x 2
Epilog 32Ex 60watt (new tube, putting out 72 watts)
Epilog Summit 25watt x2
IL-60 2 x 100 watts 60" x 120"
Corel X6
Adobe CS6 Master Edition
"http://www.sawmillcreek.org/friends.php?id=128
Double sided tape or a good contact adhesive/impact adhesive would also work well outside.
Epilog 45w Helix X3/X5 Corel Microflame Generator (flame polisher) Heat Bender
thanks for the input guys.
Xenetech 13x25, Xenetech 9x12 Rotary, Corel 11, Photograv 2.11