Doe's anyone know how to change the default palette from CMYK TO RGB in x4
Doe's anyone know how to change the default palette from CMYK TO RGB in x4
Hi Brian,
Under Window choose option colour palettes, the third option in the list is default RBG select it and unselect CMYK.
Hope that helps
Regards
Phil
Brian, whatcha doing with that palette? You should have the ULS palette as the default, should you not? The one that's got only the colors that match the driver?
Or are you working on non-laser items?
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
The RGB palette uses the same colors as the ULS palette except the RGB is a full palette.
You can have more than one palette positioned on your Corel workspace. Just check what you want. I use RGB and CMYK. You can also add the ULS palette.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Thanks for the help, just can't get rid of the cmyk and just leave rgb
Unchecking cymk doesn't remove it?
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7