This FreeStuff Drawing is scheduled for November 18th, 2008
Contributors only must Opt-In to be eligible for this drawing here - http://www.sawmillcreek.org/showthre...723#post959723
The winner, Chip Peterson, has been announced in the 1st post
Michael Kowalczyk
Michael Kowalczyk is offering a box of 3mm B/BB Russian Birch that is cut to size (approx. 11 3/4" x 23 3/4") and contains 25 of these cut to size sheets that are ready to load in your laser and start cutting your Laser Buzz wall tributes, ornaments or many other laser projects.
Here is a portion of his info sheet to understand the value of this package.
“You do not have to drive to a lumber yard and try to get a 5' x 5' sheet in your vehicle, if you can find someone who sells this material close to you. Even if you can find it, the chances of this home center or lumber yard cutting it to get maximum yield would take a skilled person with the right equipment and sharp blade some additional time. This alone can save you an hour or two. Then if you find it, consider the time it takes to calculate the correct order of cutting to obtain the best yield and then cut it. You must also have a special saw blade, that is if you have a table saw. One blade is an 80+ tooth ATB which costs about $100.00+- if you want to have minimal blowout on the sheet on a cross grain cut.
I mention this so that you can see what is involved to get your blanks. Some people are set up to do this and we offer it to those who may not have the means to do it themselves or just want it done for them so they can have quality material at a fixed price. Plan ahead so you have some inventory and you can save some money on shipping.”
Send Michael a Private Message
If you can't wait to see if you have won this offering, please send Michael a PM or an email to get more info or place an order."
You must Opt-In by posting in this thread to be eligible for this drawing.
