This is a Photo of a Slot Car Box that I mentioned in an earlier thread. I posted it because some folks aren't sure what a Slot Car is. My boxes are made for 1/24th scale Slot Cars, that are mostly raced on a Commercial, 8 lane track. It is the same concept as the small, HO scale sets that are mostly a home set. These tracks can be in any configuration, as as long as 250'. The tracks are made from MDF, with routed grooves for the guide tongue of the car to fit into. The track is powered by 12-14 volts of DC. Just finished this box this morning, and it's new home will be in New York. The boxes are 1/2" Oak Plywood, with 1/4" hardboard drawer bottoms/sides, and Car Shelves. The Car Storage is on either side, and the Car Shelves slide in and out, and are adjustable in 1" increments. I sell quite a few of these, and the LOML lets me use all the money for additions to my Wood Shop! AIn't she SWEET?
The profits from this box, and another like it just bought my Dust Collector! Finish is Minwax Golden Oak & 3 Coats of Polycrylic.