need knob and tote for #4

[Justin Grow]

hey. I've got a pretty good #4 that I'm tuning up but it needs a knob and tote and unbent bolts for both to be good to go.
The body itself has PAT'D/MAR-25-02/AUG-19-02 cast in the base.
Anyone got any leads as to where I should go to get a good set. Doesnt have to be old, new is ok as it will be a user.

[David Tiell]

THere are a number of places to buy. Highland hardware sells nice rosewood sets, as do a couple other retail places. You can also usually find them on that auction site for a decent price. Then there are the old tool dealers online. But you can also make one yourself. Clint Jones just recently did a great pictorial lesson on making your one if you want to give that a shot. Should be able to do a search for it.

[Mark Vayman]

You can try Bob Kaune at:
http://www.antique-used-tools.com:80/comparts.htm
thanks,
Mark

[Richard Niemiec]

PM Clint Jones, a member here; he'll be likely to help you out, or Walt at Brass City Records. RN

[Justin Grow]

Thanks. Clint and I are swapping some parts.