I'm with Rob. My panels connect straight across via the bottom punch-outs.
I'm with Rob. My panels connect straight across via the bottom punch-outs.
"A hen is only an egg's way of making another egg".
– Samuel Butler
Ok, so I'm planning on running PVC conduit down the walls to the boxes, but I'm thinking of running NM through the ceiling joists over to where the conduit will run down the wall. Do I need to have a box at the top end of the conduit and switch from NM to THHN to run down the conduit? Can I just run the NM into the conduit and down to the box at the bottom?