Quote Originally Posted by Mike Hood View Post
Tried running the table down by hand (by turning the belts below). It might be thinking it's still too high to properly boot. I had something similar happen to me, and running everything down, and starting from home position it passed and ran fine from then on.
Thanks you two for helping me out 10 years later. I was in the office needing to run a few jobs on 12/28/17 and ran into the same issue. I have a Epilog Helix and was changing out the table and forgot to lay one of the side rulers down. Lucky and thankful there was no damage. Just had to turn the belts to lower table hit the switch and that little optic got on the X rail and took the redeye home. HAPPY NEW YEAR