Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: SMC Turner Interview - Bob Hallowell

  1. #1
    Join Date
    Aug 2005
    Benton Falls, Maine

    SMC Turner Interview - Bob Hallowell

    Name: Bob Hallowell

    How young are you? 35

    Physical description:
    Iím a little teapot, SHORT and STOUT

    Where's home?

    Iíve lived in Dubois, Pa most of my life except for my 5 years in the Air Force during which I lived in Las Vegas, Denver, and England.

    Family information:
    I have a wonderful wife Heather, and 2 daughters Haley who is 14 and Aliza who is 5.

    Wyoming 01.jpg Wyoming 02.jpg Wyoming 03.jpg

    Do you have a website?
    I have a website but itís not real good and I havenít updated it for a while. I need to work on that.

    Looks pretty good to me!

    How come you don't live in Wyoming?
    Not sure why, I hear there is some great fly fishing there!

    Yup. Other stuff, too.

    For the last 11 years I have been taking care of the cellular system in my area for a major cellular company. I fix and maintain all the radio and telco equipment so the calls can be processed. Can you here me now?


    Shop Overview:
    I have my half of the garage about 12x28. Iím thinking about closing in my half so I can put some heat in it for the 10deg days! I have a tablesaw, planer, jointer, drill press, bandsaw, routers and the lot. Plus a lot of handtools.

    How many lathes do you own?
    My first lathe was a 14Ē Grizzly I bought used and had it for about 4 months till it basically fell apart. Then I bought the Palmgren and used it for about 7 months til Frankenlathe came along.

    Right now I just own Frankie Ė who is a great lathe for me. It is an older delta prototype for the dl-40 from the 80ís that I got a few months ago, it didnít come with the factory motor or stand. I bought a vfd and just got a Baldor vector motor and put on it. She has a 16Ē inboard and a 23Ē outboard capability with about 50Ē between centers. I donít see me upgrading in the near future now. I would put this lathe up there with the 16Ē jet, so I will save those pennies for a Oneway or a Robust way down the road.

    Wyoming 04.jpg

    How many turning tools do you have?
    Um, more than I thought. Mostly store-bought but I have a scraper I made out of 1-1/8x Ĺ HSS that I use a lot. My favorite is the first bowl gouge I bought. It is a 3/8 v-grooved pinnacle. I use it for something on almost everything I turn. It is the only bowl gouge I can get a good shear cut with.

    How long have you been turning, and what got you started in the first place?

    A little over a year, I saw a used lathe in the local trade magazine and I told my wife that I should get it so I could turn legs and what not for me fl*twork. Never did I dream the vortex was calling so hard!

    What's your favorite flavor of ice cream?
    All of them as long as itís not chocolate.

    What do you enjoy most about turning?

    Creating a beautiful piece of art. Plus it helps I can finish a piece in Ĺ to 5 hours instead of 10-80 hours of fl*twork

    What do you enjoy the least about turning?

    Cleaning up the shavings, but worse having my wife be mad at me for tracking shaving in the house all of the time

    Do you belong to a turning club?

    No. The only near one meets on the second Tuesday of the month and that is the same day I have a commitment to my church for a leadership meeting, and in my life, God comes first.

    What was your first completed turned project? You get bonus points for a picture of it
    My wife and I both made a little bowl out of some 2x2 oak stock we had. I gotta tell ya herís was nicer than mine.

    Whatís your favorite individual piece that you have turned, and why?
    Probably the spalted maple HF I turned a few months ago

    wyoming 05.jpg

    Hang on while I swap out the typewriter ribbon.
    Only the Blue Roads

  2. #2
    Join Date
    Aug 2005
    Benton Falls, Maine
    Whatís your favorite form that you turn?
    I like HFs and NEs, but end up turning a lot of pens and pepper mill to sell.

    What do you not turn now that you want to - or plan to - in the future?
    I would like to do some segmenting in the future.

    How do you take your Moxie?
    Shaken, not stirred.

    Whatís your favorite form someone else turns?
    Travisís HFs.

    Whatís your favorite individual piece someone else has turned, and why?
    There is just too many to chose

    Okay. How about these?

    Whatís your favorite wood to work with and why?
    Afzelia Ė it works great and is very stable and the right piece looks as good as amboyna!

    What brought you to SMC?
    I start posting here first in the Neander Forum. Then there was the day I bought the Grizzly lathe.

    What was your first post about? Or donít you remember?
    Iím sure it was about a hand plane, or something along that line

    Not even close, Bub.

    Do you recall the first thread you started?
    Nope. But Iím sure youíll dig it up.


    Have you met or hung out with any fellow Creekers?
    I met up with Blake Mculley and his wife for a day of turning. Plus, I took a class from Bill Grumbine last fall.

    Now let's get a little deep... If you were a turning tool, what tool would you be and why?
    Maybe a Scraper, cause I can sometimes rub people the wrong way but am normally a good guy to be around.

    If you won the Irish Sweepstakes what part of your life would change?
    I would have a lot more time to bike (peddle), fly fish (maybe even in Wyoming) and of coarse turn!

    Thanks, Bob. Glad to know we can hear you now.

    wyoming 06.jpg wyoming 07.jpg wyoming 08.jpg

    wyoming 09.jpg wyoming 10.jpg
    Only the Blue Roads

  3. #3
    Join Date
    May 2006
    Roanoke Virginia
    Blog Entries
    It was nice to read your interview Bob good to know more about you.

    Turning comes easy to some folks .... wish I was one of them

    and only 958 miles SE of Steve Schlumpf

  4. #4
    Join Date
    Mar 2003
    SE PA - Central Bucks County
    Very nice interview, Bob. And that's a beautiful area you're living in.

    The most expensive tool is the one you buy "cheaply" and often...

  5. #5
    Join Date
    Sep 2006
    Henderson Kentucky
    Blog Entries
    Thanks for the interview. It is good to get to know other Creekers if not in person, this is the next best thing.

  6. #6
    Join Date
    Jan 2005
    Goodland, Kansas
    Great interview Bob. It is great to get to know you better.

    Never put off until tomorrow what you can do the day after tomorrow.

    To succeed in life, you need three things: a wishbone, a backbone and a funnybone.

  7. #7
    Join Date
    Aug 2006
    Mooreland, Indiana
    Even though I feel as if I know you, it's great to read something about you. Great interview.


  8. #8
    Cool interview Bob, It is good to get to know folks.
    Success is the sum of Failure and Learning

  9. #9
    very nice interview, glad to get to know you better.
    you do very nice work

  10. #10
    Join Date
    Jul 2006
    Thanks guys it's been great getting to know you guys.


  11. #11
    Join Date
    Jan 2005
    San Antonio, TX
    Beautiful kids, Bob! It's good to learn more about you. Nice woodturnings too.

  12. #12
    Join Date
    Jan 2006
    Schenectady, NY

    Hi Bob...

    It's great getting to know you better too. Very nice interview. Beautiful work!
    Happy and Safe Turning, Don

    Woodturners make the world go ROUND!

  13. #13
    Join Date
    Jan 2004
    Lewiston, Idaho
    Great interview Bob! It's nice to know more about you.

  14. #14
    Join Date
    Feb 2003
    Conway, Arkansas
    Wow Bob..!!!!! Nice interview. It's nice to know a bit more about you.

    Hey....can "you" hear "me" now?
    Thanks & Happy Wood Chips,
    Dennis -
    Get the Benefits of Being an SMC Contributor..!
    ....DEBT is nothing more than yesterday's spending taken from tomorrow's income.

  15. #15
    That was nice. Thanks for doing that...
    Just cut off the parts that don't look like a bowl...

Similar Threads

  1. Turner Interview Listing - Recent Inductee - Jack Mincey
    By Andy Hoyt in forum Turner's Forum
    Replies: 1
    Last Post: 05-09-2010, 4:27 PM
  2. SMC Turner Interview - Ed Scolforo
    By Andy Hoyt in forum Member Interviews
    Replies: 11
    Last Post: 09-09-2007, 9:50 PM
  3. SMC Turner Interview - Jonathon Spafford
    By Andy Hoyt in forum Member Interviews
    Replies: 22
    Last Post: 07-24-2007, 12:20 PM
  4. SMC Turner Interview - Gary DeWitt
    By Andy Hoyt in forum Member Interviews
    Replies: 15
    Last Post: 10-29-2006, 9:14 PM
  5. Turner Interview: Keith Burns
    By Mark Cothren in forum Member Interviews
    Replies: 29
    Last Post: 04-01-2006, 2:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts