Found this on the web and thought I would pass it along.
http://www.dunwellguitar.com/FingerPlanes/MyDesign.htm
Found this on the web and thought I would pass it along.
http://www.dunwellguitar.com/FingerPlanes/MyDesign.htm
Now these are really sweet!
Has anyone ever made a scraper plane that size? I could imagine using one to finish small scale work (boomerangs in my case).
Regards,
Christoph
Made, no. But I do use a brass scraper plane about an inch and a half long from St James Bay for fine shaving mandolin braces. Works a treat.
Cheers
Steve
Those are very kewel...and what a great project for a "rainy day"!
--
The most expensive tool is the one you buy "cheaply" and often...
I like the tone of the writing. Particularly the last few paragraphs. Quote from last line of text;
"Further details are not available but it is believed that Alan has checked into the Betty Ford Center for Toolahaulics, we hope for a quick recovery."
"There is a fine line between hobby and mental illness." - Dave Barry