Dye-Sublimation of Dupont Corian

[Keith Outten]

Joe,

I will place my first order for Frog Juice tomorrow.

Mike,

I got an extra sheet of teflon with the new press we just bought. I expect the previous owner was using it insode shirts to prevent the bleed through you mentioned.

Thanks for the tips, now if I can find the box that I put the T-Shirts we ordered months ago I can give them a try

.

[Gary Hair]

Joe,

I will place my first order for Frog Juice tomorrow.

Mike,

I got an extra sheet of teflon with the new press we just bought. I expect the previous owner was using it insode shirts to prevent the bleed through you mentioned.

Thanks for the tips, now if I can find the box that I put the T-Shirts we ordered months ago I can give them a try

.

Keith,
For shirts I just use a piece of cheap copy paper inbetween the front and back. That way I don't have to clean the teflon - you will get an accumulation on the teflon sheet and have to clean it off - not so with paper.
I use:
teflon
blowout paper
shirt (back)
paper (inside the shirt)
shirt (front)
transfer
blowout paper
teflon

The paper inside can be used a couple of times, same as the blowout paper.

Gary

[Mike Null]

I agree. Also pre-press your fabric to flatten and remove humidity.

[Kenneth Hertzog]

Keith
I would be interested in a portion of the 1/4 inch sheet
I have a few projects I would like to try
ken

[Keith Outten]

Kenneth,

No pronlem, I should have a price sometime today on the 1/4" sheet and I plan to cut it into small plaque size pieces. It should be in the neighborhood of 8 cents per square inch. An 8" by 10" plaque should be about $6.40 plus shippping and I will use USPS flat rate shipping when I can.

This is really nice stuff for dye-sub and also for laser engraving, letter cut-outs, inlays, bathroom accessories, light switch covers, etc.

.

[Kenneth Hertzog]

Keith
could I get you to cut them into 8 x 24 and I'll take 3 pieces.
ken

[Keith Outten]

Kenneth,

I just got the price and ordered a sheet of 1/4". The sheet size is 30" by 96" but the price per square inch is the same as 1/2" Corian. I can cut your pieces 8" by 30" .

.

[Kenneth Hertzog]

Keith
if three pieces are to many I can live with two.
not sure if three would run you short
if not three is good
ken
let me know how you want paid and the amount with shipping

[Keith Outten]

Kenneth,

The Glasier White 1/4" Corian was delivered yesterday, You can have three pieces of 30" by 8", it will still leave me plenty for the jobs I have planned with some left over.

I will PM you with the shipping costs ASAP, looks like I will have to build a box to ship your Corian.

.

[Kenneth Hertzog]

Keith
thank you
the laser bed is only 24 inch so if cutting it smaller
makes it easier to ship do so and I like you can also use the
smaller pieces
thanks again
ken

[Keith Outten]

Ken,

I'll cut them 24".