Results 1 to 14 of 14

Thread: Turning willow

  1. #1

    Turning willow

    Hello all, new to the forum, (registered that is) as I have browse here for quite some time. My Mother-in-law has some willow trees that need to be cut down at her cabin and she wants to know if I want the wood.

    Have any of you ever turned willow? If so what form/finish. Jeff

  2. #2
    Join Date
    Oct 2006
    Location
    Harvey, Michigan
    Posts
    20,527
    Welcome to the Creek Jeff!

    Don't have an answer for you but will be watching this thread as my wife has a co-worker with a willow that he wants me to come over and remove. Haven't worked with willow yet - so am looking forward to finding out how it turns.
    Steve

    “You never know what you got til it's gone!”
    Please don’t let that happen!
    Become a financial Contributor today!

  3. #3
    Join Date
    Jul 2005
    Location
    East of the Mississippi
    Posts
    3,807
    Welcome to the Creek Jeff !! Won't find a better place anywhere.

    I have never turned willow so I can't help you with that but I'm sure you will hear from some that have.
    941.44 miles South of Steve Schlumph

    TURN SAFE

  4. #4

    another thought

    If you have turned willow....please ad pics of your success/failures.

  5. #5
    Join Date
    Dec 2006
    Location
    Lubbock, Texas
    Posts
    914
    Have not personally turned any willow, but have turned elm. Thay have the same interlocking grain and close to the same hardness. BEWARE OF THE WARP MONSTER. Let this wood wither dry naturally or leave plenty of thickness to be able to true up afer the piece has dried after initial turning. It has beautiful grain, but is hard to keep from cracking and warping. Good luck!
    Be a mentor, it's so much more fun throwing someone else into the vortex, than swirling it alone!

  6. #6
    I have never turned it but I have heard it is not one of the most desireable turning woods. If it was me I would definately grab a couple hunks to try it.
    http://www.reincarnatedtrees.com/id3.html
    This guy has several willow pieces on his site.
    Mike Vickery

  7. #7
    Join Date
    Dec 2003
    Location
    Putnam County, NY
    Posts
    3,086
    Many people turn it with good results. I have some that is pretty dry by now but I have never never turned it. The weight change is extraordinary from wet to dry.
    I could cry for the time I've wasted, but thats a waste of time and tears.

  8. #8
    Join Date
    Mar 2007
    Location
    Plymouth, Wisconsin
    Posts
    248
    Jeff this is my experience;

    With willow or some of the elms that I have turned the growth lines can sometimes be very far apart, they are fast growing trees. If you do get them past the WARP stage, and now with DNA you may be able to do so, you really have a challange with the final cuts and finish. The actual growth line has a quite a different hardness than the space in between so a lot of care, patience and cutting rather than sanding or scraping is requried.

    I would say go for it, the end result can be pretty cool. Be sure and post us a picture of however it turns.
    Trying to eliminate sandpaper - one curly shaving at a time.

  9. #9
    Quote Originally Posted by Mike Vickery View Post
    http://www.reincarnatedtrees.com/id3.html
    This guy has several willow pieces on his site.
    Mike, I haven't seen the trees yet....hope they have some burl like on that site your provided.

  10. #10
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    53,003
    Welcome to the 'Creek, Jeff.

    I turned a few small knobs from willow a few years ago with success, but nothing "substantial". It was quite beautiful, however.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  11. #11
    Join Date
    Jul 2006
    Location
    DuBois,Pa
    Posts
    1,557
    Jeff I turned a peice of willow burl, it turned very nice

    Bob

    http://www.sawmillcreek.org/showthread.php?t=55526

  12. #12
    Join Date
    Jan 2005
    Location
    Goodland, Kansas
    Posts
    22,605
    Willow will actually turn pretty nice. Key is hone sharp tools. I tried Ron Kents method of soaking rough outs for 2 or 3 days in dishwashing liquid and water. Willow and cottonwood actually turn pretty nice after they have dried.
    Bernie

    Never put off until tomorrow what you can do the day after tomorrow.

    To succeed in life, you need three things: a wishbone, a backbone and a funnybone.



  13. #13
    The willow that I've turned has been pretty stringy. I've had the best results roughing it while its green and then letting it dry a long time, longer than most woods. Once it's dry it turns and sands pretty nice. It can have some great color and character in the older wood in parts of the trunk near the ground.

  14. #14
    Join Date
    Oct 2005
    Location
    Little Elm, TX (off 380)
    Posts
    551

    I loved willow

    I got a cutoff piece from Mike Mastin at Curly Woods. I turned a small HF, a small pedestal bowl and one a sexy little weed pot. I was wonderful, beautiful wood. Reminded me of cherry but more colorful. Smell was wonderful, too. I'd love to get some more.

    PS....Welcome aboard. Sit 'n' spin a while.

Similar Threads

  1. Turning willow?
    By Greg Wandless in forum General Woodworking and Power Tools
    Replies: 6
    Last Post: 04-30-2009, 2:00 PM
  2. The SMC Holiday Turning Contest - We have Winners!
    By Scott Donley in forum Turner's Forum
    Replies: 240
    Last Post: 02-25-2007, 12:50 PM
  3. Turner Interview: Mike Stafford
    By Mark Cothren in forum Member Interviews
    Replies: 32
    Last Post: 03-09-2006, 2:01 AM
  4. Willow Bowl
    By Dominic Greco in forum General Woodworking and Power Tools
    Replies: 11
    Last Post: 04-30-2004, 8:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •