I'm looking for someone who's got a fairly new Epilog Helix that might be able to answer a couple of questions privately.
Anyone near their machine and able to spare a couple of minutes?
I'm looking for someone who's got a fairly new Epilog Helix that might be able to answer a couple of questions privately.
Anyone near their machine and able to spare a couple of minutes?
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
Scott,
If your questions are pertaining to the operation of the machine or how to do a certain something. Feel free to PM me with your questions and I'll see what I can do. If not, hopefully one of the members can assist.
Regards,
Peck Sidara
Epilog Laser
888.437.4564 ext. 236
Hi Peck, I'm already working with Tech Support, just looking to have someone else check something on their machine to have a point of reference before I submit more info to Tech Support that may not be accurate.
Thanks for the offer.
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
I'm also here if I can be of any assistance
Frank
Epilog 45w Helix X3/X5 Corel Microflame Generator (flame polisher) Heat Bender
Hi Scott, I have a 6 month old Epilog Helix 45W. I'm also happy to help if you should need it.
I have sent you a PM. I don't have that problem you have.
Epilog 45w Helix X3/X5 Corel Microflame Generator (flame polisher) Heat Bender
Frank & Steve,
If doing a comparison between your two identical machines, please compare apples to apples before coming to a conclusion.
Thanks,
- Make sure the same firmware is loaded.
- Make sure you're running the same file using the same parameters.
Peck Sidara
Epilog Laser
888.437.4564 ext. 236
Frank, I'll send you two files and all my version info Thursday when I get back to the office.
Thanks-
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.